Factory Price Plastic Polypropylene PP Biaxial Uniaxial Geogrids for Road Construction Civil Engineering

Uniaxial polyethylene geogrid

Uniaxial polyethylene Geogrid uses high density polyethylene(HDPE) as raw material. It is plasticsed, sheet extrused, punched, heated and stretched. In this process macromolecule is orientated into a linear state and long oval-shaped high overall network structure. Through the stretching, it makes the original distribution of the chain-shape molecules scattered reorientation and liner, which fully improved tensile strength and rigidity of the grille. Laying in the soil, through the mesh grille and soil and the interlocking between the role of occlusion constitute an efficient stress transfer agencies, so that the local load can be quickly and effectively spread to a larger area of soil, and in order to achieve lower local failure stress, to achieve the purpose of improving life. This kind of products in our company have such an international standard ultra-high early(at 2% elongation-5%) tensile strength and tensile modulus, the soil provides the idea power to bear and spread of the chain system. The tensile strength is high(>150Mpa) so that it is a kind of reinforced material that can be used in all sorts of soils.

Product Features

Polyethylene uniaxial Geogrid’s prominent advantage is the tendency of deformation under the long-term sustained load (creep) is small and anti- creep strength is much better than other geogrid material, which play an important project role in improving life.
The project is applied in construction of roads, railways and rivers, lakes and along the cost of retaining wall, dam, bridge, steep slopes and other projects geocell. Its role is to enhance the profile of the bearing capacity of the dam wall or to extend the service life, reduce the area and shorten the construction period, lower costs and reduce maintenance costs.

Product function

Uniaxial geogris is kind of high strength geosynthetic. It has extensive applications in dyke, tunnel, pier, highway, railway and building.
Its main applications are follows:
1. Enhance roadbed distortion and crack caused by the loss of roadbed materials;
2. Bear more alternate load;
3. Prevent roadbed distortion and crack caused by the loss of roadbed materials;
4. Increase the self-supporting property of fill behind retaining wall, decrease the earth pressure of retaining wall, save cost, increase service life and reduce maintenance expenses;
5. Combine anchor sprouting concrete construction method to give side slope maintenance, which not only saves investment by 30%-50% but also reduces erection time by one time or above;
6. To increase geogrid in the roadbed and surface of highways can reduce flexure, track and put off the flawing appearance by 3-9 folds and reduce the thickness of structural layer by 36%;
7. Simple and rapid construction will greatly reduce the construction cost.

ModelTGDG50TGDG65TGDG80TGDG100TGDG120TGDG135TGDG160
Raw materialsHDPEHDPEHDPEHDPEHDPEHDPEHDPE
Carbon black content                                      (%)≥2222222
Tensile strength                                        (KN/m≥ )506580100120135160
2% elongation when then tensileforce    (KN/m)14182329353947
5% elongation when then tensileforce    (KN/m)27354455657485
Yield elongation                                              (%≤ )12121212121212
Creep limit strength                                    (KN/m)2125.53139465160
Final product’ s length                                        (m)50505050505050
Width                                                                  (m)1-3

FAQ 

1.What is geosynthetics ?
Geosynthetics form a perfect erosion control fabric used extremely widely in civil engineering to stabilize and reinforce slopes and soil under or next to roads, railways, dams, water reservoirs etc.. They can be easily applied which minimizes the time of construction, as well as they limit the resources and materials necessary. 
 
What kinds of geosynthetics we have ? 
Non-woven geotextile, geogrids, geocells, GCL, Geomembranes, Geonets, Geocomposites etc .
 
What is the geosynthetics used for ?
 Lagooning and Water Treatment, Ornamental Ponds, Golf Courses
 Aquaculture and Desalination,Water Lagoons,Tanks, Reservoirs, Liquid Waste,Floating Cover Solutions, Drainage and Filtration
 
Environment
Tailing ponds, Leach mining,Landfills,Landfill Capping,Protection against corrosion,Vertical Barriers
 
Civil Works
Erosion Control,Secondary Containment,Tunnels,Linear and Surface Works,Consolidation of Margins,Soil Reinforcement,Soil Separation.
Building – Parkings,Roofing,Soundproofing

Professional geosynthetics manufacturer
 Anhui Zhonglu Engineer Materials Co., Ltd

Leave a Comment

Your email address will not be published. Required fields are marked *